Material number G51600: 5160
G51600 is the Unified Numbering System designation for 5160, chromium spring steel, quenched and tempered specified in ASTM A29.
Reading G51600 digit by digit
A UNS designation (ASTM E527 / SAE J1086) is a letter followed by five digits. The letter G marks the alloy family — here AISI and SAE carbon and alloy steels — and the five digits 51600 place the composition inside it, usually by carrying an older AISI or SAE number forward.
What a UNS number does not carry is the product form or the property level. G51600 therefore appears in several ASTM specifications — plate, bar, pipe, forging — each with its own mechanical requirements, and the number alone is not a complete purchase specification.
G51600 identity card
| Item | Value |
|---|---|
| UNS number (ASTM E527) | G51600 |
| Symbolic grade name | 5160 |
| Steel group | G — AISI and SAE carbon and alloy steels |
| Sequential number in group | 51600 |
| Specified in | ASTM A29 |
| Steel family | Spring steel |
| Also carries Werkstoff No. | 1.7176 |
| Tensile, same condition | ≈ 720–850 MPa |
| Cross-references held | 8 grades in 5 systems |
AISI 5160 is the chromium leaf-spring steel: 0.60 % C and 0.80 % Cr, 1600–1900 MPa tensile at 48–52 HRC. Composition, heat treatment, hardness bands and 55Cr3/SUP9 equivalents.
Full data sheet for 5160 → · Equivalent grades → · ASTM A29 →
UNS G — the neighbouring numbers
| UNS number | Grade | Type |
|---|---|---|
| G10100 | SAE 1010 | Low-carbon steel for cold forming, welding and case hardening |
| G10180 | 1018 | Low-carbon steel, cold-finished bar (case-hardenable) |
| G10450 | 1045 | Medium-carbon steel, hardenable |
| G10950 | 1095 | High-carbon steel (spring / knife / blade steel) |
| G41300 | 4130 | Chromium-molybdenum low-alloy steel, weldable (chromoly) |
| G41400 | 4140 | Chromium-molybdenum low-alloy steel (chromoly) |
| G43400 | 4340 | Nickel-chromium-molybdenum low-alloy steel, deep hardening |
| G52986 | 52100 | High-carbon chromium bearing steel |
| G61500 | 51CrV4 | Chromium-vanadium spring steel, quenched and tempered |
| G86200 | 8620 | Nickel-chromium-molybdenum case-hardening steel |
| G92600 | 9260 | Silicon-manganese spring steel, quenched and tempered |
Same UNS letter, so the same alloy family. The digits generally carry an older AISI or SAE number.