Steel Standart

Material number 1.0345: P235GH

1.0345 is the European material number (Werkstoffnummer, EN 10027-2) for P235GH, non-alloy steel for pressure purposes with elevated-temperature properties specified in EN 10028-2.

Reading 1.0345 digit by digit

An EN 10027-2 number has the form 1.XXYY. The leading 1 marks it as steel. The pair 03 is the steel group, and for this number that group is steels with < 0.12 % C or Rm < 400 MPa. The final pair 45 is a sequential count inside that group and carries no meaning of its own — 1.0345 is simply the 45th entry registered there.

The group digits are the useful part. Reading 03 tells you what kind of steel you are looking at before you know anything else about it, and the 6 other numbers from group 03 held here are listed below.

1.0345 identity card

ItemValue
Material number (EN 10027-2)1.0345
Symbolic grade nameP235GH
Steel group03 — steels with < 0.12 % C or Rm < 400 MPa
Sequential number in group45
Specified inEN 10028-2
Steel familyPressure vessel steel
Yield, first condition in the table235 MPa (≤ 16 mm, room temperature)
Tensile, same condition360–480 MPa
Cross-references held4 grades in 2 systems

P235GH (1.0345) is the entry grade of EN 10028-2: 235 MPa yield at room temperature and, unlike a structural steel, guaranteed proof strength up to 400 °C.

Full data sheet for P235GH → · Equivalent grades → · EN 10028-2 →

Group 03 — the neighbouring numbers

Material numberGradeType
1.0301SAE 1010Low-carbon steel for cold forming, welding and case hardening
1.0301C10Unalloyed low-carbon case-hardening steel
1.0330DC01Cold-rolled low-carbon steel for cold forming
1.0332DD11Hot-rolled low-carbon steel for cold forming
1.0332St 22Withdrawn DIN designation for hot-rolled mild steel sheet for cold forming
1.0350DX52DHot-dip coated low-carbon steel for drawing

Same group digits, so the same broad class of steel. The sequential digits do not rank them.