DX52D equivalent grades: ASTM, EN, JIS, GB, DIN
DX52D is hot-dip coated low-carbon steel for drawing specified in EN 10346. The cross-reference runs across 2 standard systems and grades every candidate, so the reason a substitution is safe is on the same row as the name. The full DX52D data sheet carries the composition and mechanical tables.
Last updated
The near matches are DX51D; what differs is the tested condition, not the alloy. Functionally interchangeable, S250GD, SPHC serve a different route to the same duty — check the design, not the analysis. Across systems that is 2 in EN (European), 1 in JIS (Japan).
Cross-reference table
| Grade | System | Match | Why / differences |
|---|---|---|---|
| DX51D | EN (European) | Near | One formability step below: no guaranteed yield, tensile up to 500 MPa and 22 % elongation. Interchangeable only on simple bends. |
| S250GD | EN (European) | Functional | Same standard and coatings but a structural grade with a 250 MPa minimum yield — specified when the sheet carries load rather than being formed. |
| SPHC | JIS (Japan) | Functional | Uncoated hot-rolled commercial sheet; comparable base metal but no coating and no yield band. The coated JIS counterpart is SGCD1 in G3302. |
Identical, near and functional are defined once on the grade index; the reason column below says which limit differs in each case.
DX52D in EN (European)
- DX51D — Near One formability step below: no guaranteed yield, tensile up to 500 MPa and 22 % elongation. Interchangeable only on simple bends.
- S250GD — Functional Same standard and coatings but a structural grade with a 250 MPa minimum yield — specified when the sheet carries load rather than being formed.
DX52D in JIS (Japan)
- SPHC — Functional Uncoated hot-rolled commercial sheet; comparable base metal but no coating and no yield band. The coated JIS counterpart is SGCD1 in G3302.
Superseded names for DX52D
- St 03 Z — DIN 17162 (withdrawn): Legacy German designation for the drawing quality of hot-dip zinc coated sheet.
- FeP02G — EN 10142:1990 (withdrawn): The pre-2000 European designation before EN 10346 merged the coating standards.
- DX52D+Z — EN 10142 / EN 10327 (both withdrawn): Same designation, earlier standards; EN 10346 replaced EN 10142, 10214, 10215, 10326 and 10327 in one document.
Key data for DX52D
Full composition, mechanical properties by thickness, heat treatment and applications for DX52D →
Verified against EN 10346:2015. Last checked: October 2026.