The chemical composition of A765/A765M-07(2017) steel grade typically consists of carbon (C), manganese (Mn), phosphorus (P), sulfur (S), silicon (Si), nickel (Ni), chromium (Cr), molybdenum (Mo), vanadium (V), columbium (Cb), titanium (Ti), and nitrogen (N). The exact composition may vary depending on the specific grade and variant of the steel. The mechanical properties of A765/A765M-07(2017) […]
Tag Archives: Characteristics
The A745/A745M-15 is a specific grade of steel that has been standardized and identified by its specific chemical composition and mechanical properties. It is important to explore the characteristics and applications of this steel grade to understand its suitability in various industries. Chemical Composition: The chemical composition of A745/A745M-15 steel grade is usually specified by […]
Exploring the Characteristics and Applications of A729/A729M-17 Steel Grade A729/A729M-17 is a steel grade that is commonly used in various applications due to its unique characteristics and mechanical properties. This steel grade is defined by the ASTM A729/A729M standard, which sets out the requirements for the chemical composition, mechanical properties, and other specifications of the […]
There are no results or details available for the specifications or properties of A686-92(2016) steel grade. It is suggested to refer to the specific standard or contact the manufacturer for more information.
The A657/A657M-13 steel grade is a high-strength, low-alloy structural steel that is commonly used in construction and industrial applications. It is designed to provide enhanced strength and durability while maintaining good weldability and formability. One key characteristic of the A657/A657M-13 steel grade is its high yield strength, which allows for the construction of lighter and […]
The A653/A653M-17 steel grade refers to a specific type of steel that is defined by the ASTM International. This standard outlines the requirements for the chemical composition, mechanical properties, and standard number for this steel grade. In terms of the chemical composition, the A653/A653M-17 steel grade typically consists of carbon (C), manganese (Mn), phosphorus (P), […]
A649/A649M-10(2015) is a standard specification for normalized high-strength low-alloy structural steel plates. This grade of steel is commonly used in construction and structural applications where high strength and excellent weldability are required. The standard provides specific requirements for chemical composition, mechanical properties, and heat treatment of the steel. The chemical composition of A649/A649M-10(2015) steel grade […]
ASTM A646/A646M-17 is a specification for premium quality, high-strength steel plates produced from fully killed, fine-grained, vacuum-degassed, and calcium-treated steel. This steel grade is primarily used in applications that require high strength and low weight, such as military vehicles and structural components. Key Characteristics: 1. Chemical Composition: The chemical composition of A646 steel primarily consists […]
The A625/A625M-13 steel grade is a high-strength, low-alloy steel that is commonly used in structural applications. It is known for its excellent combination of strength, toughness, and weldability. The chemical composition of A625/A625M-13 steel grade usually consists of carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, molybdenum, and copper. These elements contribute to the overall strength, […]
The A612/A612M-12 steel grade is a standard specification for pressure vessel plates, carbon-manganese-silicon steel, intended for welded pressure vessels in moderate and lower temperature service. This steel grade has good notch toughness and is suitable for environments with moderate to low temperatures. The chemical composition of A612/A612M-12 steel grade is as follows: – Carbon (C): […]