Chemical Composition:
The chemical composition of A1059/A1059M-08(2013) steel grade is as follows:
– Carbon (C): 0.15% maximum
– Manganese (Mn): 1.00% maximum
– Phosphorus (P): 0.015% maximum
– Sulfur (S): 0.005% maximum
– Silicon (Si): 0.50% maximum
– Copper (Cu): 0.35% maximum
– Nickel (Ni): 0.25% maximum
– Chromium (Cr): 0.12% maximum
– Molybdenum (Mo): 0.05% maximum
– Vanadium (V): 0.05% maximum
Mechanical Properties:
The mechanical properties of A1059/A1059M-08(2013) steel grade are as follows:
– Tensile Strength: 330 MPa (48,000 psi) minimum
– Yield Strength: 205 MPa (30,000 psi) minimum
– Elongation: 20% minimum in 2 inches (50 mm)
– Reduction of Area: 35% minimum
Standard Number:
The standard number for A1059/A1059M-08(2013) steel grade is ASTM A1059/A1059M-08(2013).
Corresponding:
The corresponding specification for A1059/A1059M-08(2013) steel grade is ASTM A1008/A1008M-20 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable.