ASTM Steel–Piping, Tubing, Fittings
| Table of Contents | |||
|---|---|---|---|
| Standard Number | Title | ||
| 1 | A53/A53M-12 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | |
| 2 | A105/A105M-13 | Standard Specification for Carbon Steel Forgings for Piping Applications | |
| 3 | A106/A106M-13 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | |
| 4 | A134-96(2012) | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) | |
| 5 | A135/A135M-09 | Standard Specification for Electric-Resistance-Welded Steel Pipe | |
| 6 | A139/A139M-04(2010) | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) | |
| 7 | A178/A178M-02(2012) | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | |
| 8 | A179/A179M-90a(2012) | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | |
| 9 | A181/A181M-13 | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping | |
| 10 | A182/A182M-13a | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | |
| 11 | A192/A192M-02(2012) | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | |
| 12 | A193/A193M-12b | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications | |
| 13 | A194/A194M-13 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | |
| 14 | A209/A209M-03(2012) | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes | |
| 15 | A210/A210M-02(2012) | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes | |
| 16 | A213/A213M-13 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | |
| 17 | A214/A214M-96(2012) | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes | |
| 18 | A234/A234M-13 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service | |
| 19 | A249/A249M-10a | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | |
| 20 | A250/A250M-05(2009) | Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes | |
| 21 | A252-10 | Standard Specification for Welded and Seamless Steel Pipe Piles | |
| 22 | A254/A254M-12 | Standard Specification for Copper-Brazed Steel Tubing | |
| 23 | A268/A268M-10 | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | |
| 24 | A269-13 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service | |
| 25 | A270/A270M-10 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing | |
| 26 | A312/A312M-13b | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | |
| 27 | A320/A320M-11a | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service | |
| 28 | A333/A333M-13 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness | |
| 29 | A334/A334M-04a(2010) | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low- Temperature Service | |
| 30 | A335/A335M-11 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service | |
| 31 | A350/A350M-13 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | |
| 32 | A358/A358M-12 | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications | |
| 33 | A369/A369M-11 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High- Temperature Service | |
| 34 | A370-12a | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | |
| 35 | A376/A376M-13 | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service | |
| 36 | A381-96(2012) | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems | |
| 37 | A403/A403M-13a | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | |
| 38 | A409/A409M-13 | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High- Temperature Service | |
| 39 | A420/A420M-13 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low- Temperature Service | |
| 40 | A423/A423M-09 | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes | |
| 41 | A426/A426M-13 | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service | |
| 42 | A437/A437M-12 | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service | |
| 43 | A450/A450M-10 | Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes | |
| 44 | A451/A451M-06(2010) | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service | |
| 45 | A453/A453M-12 | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels | |
| 46 | A498-06 | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins | |
| 47 | A500/A500M-13 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes | |
| 48 | A501-07 | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing | |
| 49 | A511/A511M-12 | Standard Specification for Seamless Stainless Steel Mechanical Tubing | |
| 50 | A512-06(2012) | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing | |
| 51 | A513/A513M-12 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing | |
| 52 | A519-06(2012) | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing | |
| 53 | A522/A522M-13 | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service | |
| 54 | A523-96(2012) | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits | |
| 55 | A524-96(2012) | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures | |
| 56 | A530/A530M-12 | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe | |
| 57 | A540/A540M-11 | Standard Specification for Alloy-Steel Bolting for Special Applications | |
| 58 | A554-13 | Standard Specification for Welded Stainless Steel Mechanical Tubing | |
| 59 | A556/A556M-96(2012) | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes | |
| 60 | A587-96(2012) | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry | |
| 61 | A589/A589M-06(2012) | Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe | |
| 62 | A595/A595M-11 | Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use | |
| 63 | A618/A618M-04(2010) | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing | |
| 64 | A632-04(2009) | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small- Diameter) for General Service | |
| 65 | A671/A671M-13 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | |
| 66 | A672/A672M-09 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | |
| 67 | A688/A688M-12 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes | |
| 68 | A691/A691M-09 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High- Pressure Service at High Temperatures | |
| 69 | A694/A694M-13 | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service | |
| 70 | A707/A707M-13 | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service | |
| 71 | A714-99(2009)e1 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe | |
| 72 | A727/A727M-13 | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness | |
| 73 | A733-13 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples | |
| 74 | A751-11 | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products | |
| 75 | A758/A758M-13 | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness | |
| 76 | A774/A774M-13 | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures | |
| 77 | A778-01(2009)e1 | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products | |
| 78 | A787/A787M-09 | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing | |
| 79 | A789/A789M-13ae1 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service | |
| 80 | A790/A790M-13a | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe | |
| 81 | A795/A795M-13 | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use | |
| 82 | A803/A803M-12 | Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes | |
| 83 | A813/A813M-09 | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe | |
| 84 | A814/A814M-08 | Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe | |
| 85 | A815/A815M-13a | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings | |
| 86 | A822/A822M-04(2010) | Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service | |
| 87 | A836/A836M-13 | Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service | |
| 88 | A847/A847M-12 | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance | |
| 89 | A858/A858M-13 | Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service | |
| 90 | A860/A860M-13 | Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings | |
| 91 | A865/A865M-06(2012) | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints | |
| 92 | A908-03(2013) | Standard Specification for Stainless Steel Needle Tubing | |
| 93 | A928/A928M-13 | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal | |
| 94 | A941-13b | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
| 95 | A943/A943M-01(2009) | Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes | |
| 96 | A949/A949M-01(2009) | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe | |
| 97 | A960/A960M-13 | Standard Specification for Common Requirements for Wrought Steel Piping Fittings | |
| 98 | A961/A961M-13 | Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications | |
| 99 | A962/A962M-13b | Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range | |
| 100 | A972/A972M-00(2010) | Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles | |
| 101 | A984/A984M-03(2009) | Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded | |
| 102 | A988/A988M-13 | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | |
| 103 | A989/A989M-13 | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | |
| 104 | A994-13 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys | |
| 105 | A999/A999M-13 | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe | |
| 106 | A1005/A1005M-00(2010) | Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded | |
| 107 | A1006/A1006M-00(2010) | Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded | |
| 108 | A1012-10 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins | |
| 109 | A1014/A1014M-10 | Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service | |
| 110 | A1015-01(2009) | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications | |
| 111 | A1016/A1016M-13 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | |
| 112 | A1020/A1020M-02(2012) | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications | |
| 113 | A1024/A1024M-02(2012) | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless | |
| 114 | A1037/A1037M-05(2012) | Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded | |
| 115 | A1047/A1047M-05(2009) | Standard Test Method for Pneumatic Leak Testing of Tubing | |
| 116 | A1053/A1053M-12 | Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe | |
| 117 | A1058-12b | Standard Test Methods for Mechanical Testing of Steel Product―Metric | |
| 118 | A1065/A1065M-09 | Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low-Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point | |
| 119 | A1076/A1076M-13 | Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel | |
| 120 | A1082/A1082M-12 | Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications | |
| 121 | A1085-13 | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) | |
| 122 | E527-12 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) | |