| Table of Contents | |||
|---|---|---|---|
| Standard Number | Title | ||
| 1 | ASTM A27/A27M | Standard Specification for Steel Castings, Carbon, for General Application | |
| 2 | A47/A47M-99(2014) | Standard Specification for Ferritic Malleable Iron Castings | |
| 3 | A48/A48M-03(2016) | Standard Specification for Gray Iron Castings | |
| 4 | A74-17 | Standard Specification for Cast Iron Soil Pipe and Fittings | |
| 5 | A99-03(2014) | Standard Specification for Ferromanganese | |
| 6 | A100-07(2012) | Standard Specification for Ferrosilicon | |
| 7 | A101-04(2014)e1 | Standard Specification for Ferrochromium | |
| 8 | A102-04(2014) | Standard Specification for Ferrovanadium | |
| 9 | A126-04(2014) | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | |
| 10 | A128/A128M-93(2017) | Standard Specification for Steel Castings, Austenitic Manganese | |
| 11 | A132-04(2014) | Standard Specification for Ferromolybdenum | |
| 12 | A144-04(2014) | Standard Specification for Ferrotungsten | |
| 13 | A146-04(2014) | Standard Specification for Molybdenum Oxide Products | |
| 14 | A148/A148M-15a | Standard Specification for Steel Castings, High Strength, for Structural Purposes | |
| 15 | A159-83(2015) | Standard Specification for Automotive Gray Iron Castings | |
| 16 | A197/A197M-00(2015) | Standard Specification for Cupola Malleable Iron | |
| 17 | A216/A216M-16 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service | |
| 18 | A217/A217M-14 | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure- Containing Parts, Suitable for High-Temperature Service | |
| 19 | A220/A220M-99(2014) | Standard Specification for Pearlitic Malleable Iron | |
| 20 | A247-17 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings | |
| 21 | A278/A278M-01(2015) | Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) | |
| 22 | A297/A297M-17 | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application | |
| 23 | A319-71(2015) | Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts | |
| 24 | A323-05(2015) | Standard Specification for Ferroboron | |
| 25 | A324-08(2013) | Standard Specification for Ferrotitanium | |
| 26 | A327/A327M-11(2017) | Standard Test Methods for Impact Testing of Cast Irons | |
| 27 | A338-84(2014) | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) | |
| 28 | A351/A351M-16 | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts | |
| 29 | A352/A352M-17 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service | |
| 30 | A356/A356M-16 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines | |
| 31 | A367-11(2017) | Standard Test Methods of Chill Testing of Cast Iron | |
| 32 | A370-17 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | |
| 33 | A377-03(2014) | Standard Index of Specifications for Ductile-Iron Pressure Pipe | |
| 34 | A389/A389M-13 | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service | |
| 35 | A395/A395M-99(2014) | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | |
| 36 | A426/A426M-13 | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service | |
| 37 | A436-84(2015) | Standard Specification for Austenitic Gray Iron Castings | |
| 38 | A439/A439M-15 | Standard Specification for Austenitic Ductile Iron Castings | |
| 39 | A447/A447M-11(2016) | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High- Temperature Service | |
| 40 | A451/A451M-14 | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service | |
| 41 | A476/A476M-00(2014) | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls | |
| 42 | A481-05(2015) | Standard Specification for Chromium Metal | |
| 43 | A482/A482M-11(2016) | Standard Specification for Ferrochrome-Silicon | |
| 44 | A483/A483M-10(2015) | Standard Specification for Silicomanganese | |
| 45 | A487/A487M-14e1 | Standard Specification for Steel Castings Suitable for Pressure Service | |
| 46 | A488/A488M-17 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel | |
| 47 | A494/A494M-17a | Standard Specification for Castings, Nickel and Nickel Alloy | |
| 48 | A495-06(2015) | Standard Specification for Calcium-Silicon Alloys | |
| 49 | A518/A518M-99(2012) | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings | |
| 50 | A532/A532M-10(2014) | Standard Specification for Abrasion-Resistant Cast Irons | |
| 51 | A536-84(2014) | Standard Specification for Ductile Iron Castings | |
| 52 | A550-16 | Standard Specification for Ferrocolumbium (Ferroniobium) | |
| 53 | A560/A560M-12 | Standard Specification for Castings, Chromium-Nickel Alloy | |
| 54 | A571/A571M-01(2015) | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service | |
| 55 | A601/A601M-10(2015) | Standard Specification for Electrolytic Manganese Metal | |
| 56 | A602-94(2014) | Standard Specification for Automotive Malleable Iron Castings | |
| 57 | A608/A608M-14 | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures | |
| 58 | A609/A609M-12 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof | |
| 59 | A610-79(2014) | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size | |
| 60 | A636-08(2013) | Standard Specification for Nickel Oxide Sinter | |
| 61 | A644-17 | Standard Terminology Relating to Iron Castings | |
| 62 | A660/A660M-11(2016) | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | |
| 63 | A667/A667M-87(2012) | Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders | |
| 64 | A674-10(2014) | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids | |
| 65 | A701/A701M-10(2015) | Standard Specification for Ferromanganese-Silicon | |
| 66 | A703/A703M-17a | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts | |
| 67 | A716-08(2014) | Standard Specification for Ductile Iron Culvert Pipe | |
| 68 | A732/A732M-14 | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures | |
| 69 | A743/A743M-17 | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application | |
| 70 | A744/A744M-13 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | |
| 71 | A746-09(2014) | Standard Specification for Ductile Iron Gravity Sewer Pipe | |
| 72 | A747/A747M-16a | Standard Specification for Steel Castings, Stainless, Precipitation Hardening | |
| 73 | A748/A748M-87(2012) | Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use | |
| 74 | A751-14a | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products | |
| 75 | A757/A757M-15 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service | |
| 76 | A781/A781M-17 | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
| 77 | A799/A799M-10(2015) | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content | |
| 78 | A800/A800M-14 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | |
| 79 | A802-95(2015) | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination | |
| 80 | A823-99(2012) | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings | |
| 81 | A834-95(2015) | Standard Specification for Common Requirements for Iron Castings for General Industrial Use | |
| 82 | A835/A835M-10(2015) | Standard Specification for Sizes of Ferroalloys and Alloy Additives | |
| 83 | A842-11a | Standard Specification for Compacted Graphite Iron Castings | |
| 84 | A861-04(2017) | Standard Specification for High-Silicon Iron Pipe and Fittings | |
| 85 | A872/A872M-14 | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments | |
| 86 | A874/A874M-98(2014) | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service | |
| 87 | A888-17a | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications | |
| 88 | A890/A890M-13 | Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application | |
| 89 | A897/A897M-16 | Standard Specification for Austempered Ductile Iron Castings | |
| 90 | A903/A903M-99(2017) | Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection | |
| 91 | A915/A915M-08(2013) | Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades | |
| 92 | A922-05(2015) | Standard Specification for Silicon Metal | |
| 93 | A941-17 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
| 94 | A942/A942M-95(2012)e1 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells | |
| 95 | A957/A957M-15a | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
| 96 | A958/A958M-17 | Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades | |
| 97 | A985/A985M-16 | Standard Specification for Steel Investment Castings General Requirements, for Pressure- Containing Parts | |
| 98 | A990/A990M-14a | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service | |
| 99 | A995/A995M-13 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure- Containing Parts | |
| 100 | A997-08(2012) | Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination | |
| 101 | A1001-01(2015) | Standard Specification for High Strength Steel Castings in Heavy Sections | |
| 102 | A1002-16 | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy | |
| 103 | A1025/A1025M-10(2015) | Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements | |
| 104 | A1045-10(2017) | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems | |
| 105 | A1056-12(2017) | Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings | |
| 106 | A1058-14 | Standard Test Methods for Mechanical Testing of Steel Products-Metric | |
| 107 | A1062-10(2015) | Standard Specification for Steel Castings Sampling | |
| 108 | A1067/A1067M-12a | Standard Specification for Test Coupons for Steel Castings | |
| 109 | A1080-15 | Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings | |
| 110 | A1091/A1091M-16e1 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure- Containing Parts, Suitable for High Temperature Service | |
| 111 | A1095-15 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings | |
| 112 | C564-14 | Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings | |
| 113 | C1173-10(2014) | Standard Specification for Flexible Transition Couplings for Underground Piping Systems | |
| 114 | C1277-15 | Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings | |
| 115 | C1440-17 | Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems | |
| 116 | C1460-17 | Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground | |
| 117 | C1461-08(2017) | Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use | |
| 118 | C1540-15 | Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings | |
| 119 | C1541-12(2017) | Standard Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings | |
| 120 | C1563-08(2017) | Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications | |
| Standard Number | Title | |
|---|---|---|
| 1 | A1-00(2010) | Standard Specification for Carbon Steel Tee Rails |
| 2 | A2-02(2014) | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| 3 | A3-01(2012) | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
| 4 | A6/A6M-17a | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
| 5 | A20/A20M-17 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| 6 | A36/A36M-14 | Standard Specification for Carbon Structural Steel |
| 7 | A49-12 | Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars |
| 8 | A65-07(2013) | Standard Specification for Steel Track Spikes |
| 9 | A66-07(2013) | Standard Specification for Steel Screw Spikes |
| 10 | A67-00(2016) | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked |
| 11 | A131/A131M-14 | Standard Specification for Structural Steel for Ships |
| 12 | A183-14 | Standard Specification for Carbon Steel Track Bolts and Nuts |
| 13 | A184/A184M-17 | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
| 14 | A203/A203M-17 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
| 15 | A204/A204M-17 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
| 16 | A225/A225M-17 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel |
| 17 | A242/A242M-13 | Standard Specification for High-Strength Low-Alloy Structural Steel |
| 18 | A263-12 | Standard Specification for Stainless Chromium Steel-Clad Plate |
| 19 | A264-12 | Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate |
| 20 | A265-12 | Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate |
| 21 | A283/A283M-13 | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
| 22 | A285/A285M-17 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
| 23 | A299/A299M-17 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
| 24 | A302/A302M-17 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| 25 | A328/A328M-13a | Standard Specification for Steel Sheet Piling |
| 26 | A353/A353M-17 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel |
| 27 | A370-17 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| 28 | A387/A387M-17a | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
| 29 | A416/A416M-17 | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete |
| 30 | A421/A421M-15 | Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete |
| 31 | A435/A435M-17 | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
| 32 | A455/A455M-12a(2017) | Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese |
| 33 | A514/A514M-14 | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
| 34 | A515/A515M-17 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher- Temperature Service |
| 35 | A516/A516M-17 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower- Temperature Service |
| 36 | A517/A517M-17 | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered |
| 37 | A529/A529M-14 | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality |
| 38 | A533/A533M-16 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| 39 | A537/A537M-13 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
| 40 | A542/A542M-13 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium |
| 41 | A543/A543M-09(2014) | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel- Chromium-Molybdenum |
| 42 | A553/A553M-17 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel |
| 43 | A562/A562M-10(2015) | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings |
| 44 | A572/A572M-15 | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
| 45 | A573/A573M-13 | Standard Specification for Structural Carbon Steel Plates of Improved Toughness |
| 46 | A577/A577M-17 | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
| 47 | A578/A578M-17 | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
| 48 | A588/A588M-15 | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance |
| 49 | A612/A612M-12 | Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service |
| 50 | A615/A615M-16 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| 51 | A633/A633M-13 | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
| 52 | A645/A645M-10(2016) | Standard Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated |
| 53 | A648-12 | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe |
| 54 | A656/A656M-13 | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability |
| 55 | A662/A662M-17 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
| 56 | A673/A673M-17 | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel |
| 57 | A690/A690M-13a | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments |
| 58 | A704/A704M-17 | Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
| 59 | A706/A706M-16 | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| 60 | A709/A709M-17 | Standard Specification for Structural Steel for Bridges |
| 61 | A710/A710M-02(2013) | Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium- Molybdenum-Columbium Alloy Structural Steel Plates |
| 62 | A722/A722M-15 | Standard Specification for High-Strength Steel Bars for Prestressed Concrete |
| 63 | A724/A724M-09(2013) | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels |
| 64 | A736/A736M-17 | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper- Chromium-Molybdenum-Columbium (Niobium) Alloy Steel |
| 65 | A737/A737M-17 | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
| 66 | A738/A738M-12a | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
| 67 | A751-14a | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
| 68 | A759-10(2016) | Standard Specification for Carbon Steel Crane Rails |
| 69 | A767/A767M-16 | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
| 70 | A769/A769M-17 | Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes |
| 71 | A770/A770M-03(2012)e1 | Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
| 72 | A775/A775M-17 | Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
| 73 | A779/A779M-16 | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete |
| 74 | A786/A786M-15 | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
| 75 | A820/A820M-16 | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
| 76 | A821/A821M-15 | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks |
| 77 | A827/A827M-14 | Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications |
| 78 | A829/A829M-17 | Standard Specification for Alloy Structural Steel Plates |
| 79 | A830/A830M-14 | Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements |
| 80 | A832/A832M-17 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum- Vanadium |
| 81 | A841/A841M-17 | Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) |
| 82 | A844/A844M-09(2015) | Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process |
| Table of Contents | |||
|---|---|---|---|
| Standard Number | Title | ||
| 1 | A29/A29M-16 | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought | |
| 2 | A108-13 | Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished | |
| 3 | A125-96(2013)e1 | Standard Specification for Steel Springs, Helical, Heat-Treated | |
| 4 | A255-10(2014) | Standard Test Methods for Determining Hardenability of Steel | |
| 5 | A266/A266M-13 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | |
| 6 | A275/A275M-15 | Standard Practice for Magnetic Particle Examination of Steel Forgings | |
| 7 | A288-91(2013) | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators | |
| 8 | A289/A289M-97(2013) | Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators | |
| 9 | A290/A290M-16 | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears | |
| 10 | A291/A291M-17 | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears | |
| 11 | A295/A295M-14 | Standard Specification for High-Carbon Anti-Friction Bearing Steel | |
| 12 | A304-16 | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements | |
| 13 | A311/A311M-04(2015) | Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements | |
| 14 | A322-13 | Standard Specification for Steel Bars, Alloy, Standard Grades | |
| 15 | A336/A336M-15 | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts | |
| 16 | A355-89(2017) | Standard Specification for Steel Bars, Alloys, for Nitriding | |
| 17 | A370-17 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | |
| 18 | A372/A372M-16 | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels | |
| 19 | A388/A388M-16a | Standard Practice for Ultrasonic Examination of Steel Forgings | |
| 20 | A391/A391M-07(2012) | Standard Specification for Grade 80 Alloy Steel Chain | |
| 21 | A400-69(2012) | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties | |
| 22 | A413/A413M-07(2012) | Standard Specification for Carbon Steel Chain | |
| 23 | A418/A418M-15 | Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings | |
| 24 | A427/A427M-10(2015) | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction | |
| 25 | A434/A434M-17 | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered | |
| 26 | A456/A456M-08(2013) | Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings | |
| 27 | A466/A466M-07(2012) | Standard Specification for Weldless Chain | |
| 28 | A467/A467M-07(2012) | Standard Specification for Machine and Coil Chain | |
| 29 | A469/A469M-07(2017) | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors | |
| 30 | A470/A470M-05(2015) | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts | |
| 31 | A471/A471M-09(2014) | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels | |
| 32 | A472/A472M-07(2017) | Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings | |
| 33 | A473-17a | Standard Specification for Stainless Steel Forgings | |
| 34 | A485-17 | Standard Specification for High Hardenability Antifriction Bearing Steel | |
| 35 | A499-15 | Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails | |
| 36 | A503/A503M-15 | Standard Specification for Ultrasonic Examination of Forged Crankshafts | |
| 37 | A504/A504M-14 | Standard Specification for Wrought Carbon Steel Wheels | |
| 38 | A508/A508M-17 | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels | |
| 39 | A521/A521M-06(2016) | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use | |
| 40 | A531/A531M-13 | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings | |
| 41 | A534-17 | Standard Specification for Carburizing Steels for Anti-Friction Bearings | |
| 42 | A541/A541M-05(2015) | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components | |
| 43 | A551/A551M-08(2013) | Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications | |
| 44 | A561-08(2014) | Standard Practice for Macroetch Testing of Tool Steel Bars | |
| 45 | A575-96(2013)e1 | Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades | |
| 46 | A576-90b(2012) | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality | |
| 47 | A579/A579M-17a | Standard Specification for Superstrength Alloy Steel Forgings | |
| 48 | A592/A592M-10(2015) | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels | |
| 49 | A597/A597M-14 | Standard Specification for Cast Tool Steel | |
| 50 | A600-92a(2016) | Standard Specification for Tool Steel High Speed | |
| 51 | A604/A604M-07(2017) | Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets | |
| 52 | A646/A646M-17 | Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings | |
| 53 | A649/A649M-10(2015) | Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery | |
| 54 | A663/A663M-12 | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties | |
| 55 | A668/A668M-17 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | |
| 56 | A675/A675M-14 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties | |
| 57 | A681-08(2015) | Standard Specification for Tool Steels Alloy | |
| 58 | A686-92(2016) | Standard Specification for Tool Steel, Carbon | |
| 59 | A689-97(2013)e1 | Standard Specification for Carbon and Alloy Steel Bars for Springs | |
| 60 | A696-90a(2012) | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components | |
| 61 | A700-14 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment | |
| 62 | A702-13 | Standard Specification for Steel Fence Posts, Hot Wrought | |
| 63 | A711/A711M-17 | Standard Specification for Steel Forging Stock | |
| 64 | A723/A723M-10(2015) | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application | |
| 65 | A729/A729M-17 | Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service | |
| 66 | A739-90a(2016) | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure- Containing Parts, or Both | |
| 67 | A745/A745M-15 | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings | |
| 68 | A751-14a | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products | |
| 69 | A756-17 | Standard Specification for Stainless Anti-Friction Bearing Steel | |
| 70 | A765/A765M-07(2017) | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements | |
| 71 | A768/A768M-05(2015) | Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts | |
| 72 | A788/A788M-17a | Standard Specification for Steel Forgings, General Requirements | |
| 73 | A833-08a(2014) | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers | |
| 74 | A837/A837M-17 | Standard Specification for Steel Forgings, Alloy, for Carburizing Applications | |
| 75 | A859/A859M-04(2014) | Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components | |
| 76 | A866-14 | Standard Specification for Medium Carbon Anti-Friction Bearing Steel | |
| 77 | A891/A891M-16 | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels | |
| 78 | A892-09(2014)e1 | Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels | |
| 79 | A906/A906M-02(2016) | Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting | |
| 80 | A909/A909M-06(2016) | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use | |
| 81 | A914/A914M-16 | Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements | |
| 82 | A920/A920M-14 | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties | |
| 83 | A921/A921M-93(2016) | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging | |
| 84 | A939/A939M-15 | Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings | |
| 85 | A941-17 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
| 86 | A952/A952M-02(2016) | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links | |
| 87 | A956/A956M-17a | Standard Test Method for Leeb Hardness Testing of Steel Products | |
| 88 | A965/A965M-14 | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts | |
| 89 | A966/A966M-15 | Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current | |
| 90 | A973/A973M-07(2012) | Standard Specification for Grade 100 Alloy Steel Chain | |
| 91 | A982/A982M-10(2015) | Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils | |
| 92 | A983/A983M-06(2016) | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines | |
| 93 | A986/A986M-01(2016) | Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings | |
| 94 | A1021/A1021M-05(2015) | Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High- Temperature Service | |
| 95 | A1038-17 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | |
| 96 | A1040-10(2015)e1 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels | |
| 97 | A1049/A1049M-10(2015) | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | |
| 98 | A1058-14 | Standard Test Methods for Mechanical Testing of Steel Products-Metric | |
| 99 | A1075-12(2017)e1 | Standard Specification for Flanged Steel U-Channel Posts | |
| 100 | A1089/A1089M-14 | Standard Specification for Highly Loaded Anti-Friction Bearing Steel | |
| 101 | A1090/A1090M-14 | Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance | |
| 102 | E588-03(2014) | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method | |
| 103 | E618-07(2013) | Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine | |
| Table of Contents | |||
|---|---|---|---|
| Standard Number | Title | ||
| 1 | A90/A90M-13 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc- Alloy Coatings | |
| 2 | A111-99a(2014) | Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire | |
| 3 | A116-11(2016) | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric | |
| 4 | A121-13(2017) | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire | |
| 5 | A123/A123M-17 | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products | |
| 6 | A143/A143M-07(2014) | Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement | |
| 7 | A153/A153M-16a | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | |
| 8 | A239-14 | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles, | |
| 9 | A363-03(2014) | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand | |
| 10 | A384/A384M-07(2013) | Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies | |
| 11 | A385/A385M-17 | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) | |
| 12 | A390-06(2016) | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) | |
| 13 | A392-11a(2017) | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric | |
| 14 | A411-08(2017) | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire | |
| 15 | A428/A428M-10(2014) | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles | |
| 16 | A459-08(2013) | Standard Specification for Zinc-Coated Flat Steel Armoring Tape | |
| 17 | A460-11(2016) | Standard Specification for Copper-Clad Steel Wire Strand | |
| 18 | A463/A463M-15 | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process | |
| 19 | A474-03(2017) | Standard Specification for Aluminum-Coated Steel Wire Strand | |
| 20 | A475-03(2014) | Standard Specification for Zinc-Coated Steel Wire Strand | |
| 21 | A491-11(2017) | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric | |
| 22 | A586-04a(2014) | Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand | |
| 23 | A599/A599M-07(2017) | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet | |
| 24 | A603-98(2014) | Standard Specification for Zinc-Coated Steel Structural Wire Rope | |
| 25 | A623M-16 | Standard Specification for Tin Mill Products, General Requirements [Metric] | |
| 26 | A623-16 | Standard Specification for Tin Mill Products, General Requirements | |
| 27 | A624/A624M-13 | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced | |
| 28 | A625/A625M-13 | Standard Specification for Tin Mill Products, Black Plate, Single-Reduced | |
| 29 | A626/A626M-16 | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced | |
| 30 | A630-16ae1 | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate | |
| 31 | A640-97(2014) | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable | |
| 32 | A641/A641M-09a(2014) | Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire | |
| 33 | A650/A650M-13 | Standard Specification for Tin Mill Products, Black Plate, Double Reduced | |
| 34 | A653/A653M-17 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | |
| 35 | A657/A657M-13 | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced | |
| 36 | A740-98(2014) | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) | |
| 37 | A741-11(2016) | Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail | |
| 38 | A742/A742M-13 | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe | |
| 39 | A754/A754M-11(2016) | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence | |
| 40 | A755/A755M-16e1 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products | |
| 41 | A760/A760M-15 | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains | |
| 42 | A761/A761M-17 | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches | |
| 43 | A762/A762M-15 | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains | |
| 44 | A764-07(2017) | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs | |
| 45 | A780/A780M-09(2015) | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings | |
| 46 | A792/A792M-10(2015) | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process | |
| 47 | A796/A796M-17a | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications | |
| 48 | A798/A798M-13 | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications | |
| 49 | A807/A807M-13 | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications | |
| 50 | A809-08(2017) | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire | |
| 51 | A810-01(2014) | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh | |
| 52 | A817-12(2017) | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire | |
| 53 | A818-06(2016) | Standard Specification for Coppered Carbon Steel Wire | |
| 54 | A824-01(2017) | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence | |
| 55 | A849-15 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe | |
| 56 | A854/A854M-08(2017) | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire | |
| 57 | A855/A855M-03(2014) | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand | |
| 58 | A856/A856M-03(2014) | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire | |
| 59 | A862/A862M-98(2014) | Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe | |
| 60 | A875/A875M-13 | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process | |
| 61 | A879/A879M-12(2017) | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
| 62 | A896/A896M-09(2014) | Standard Practice for Conducting Case Studies on Galvanized Structures | |
| 63 | A902-17a | Standard Terminology Relating to Metallic Coated Steel Products | |
| 64 | A917-08(2015) | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) | |
| 65 | A918-06(2011) | Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
| 66 | A924/A924M-17a | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process | |
| 67 | A925-03(2014) | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand | |
| 68 | A929/A929M-17 | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe | |
| 69 | A930-09(2014) | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits | |
| 70 | A964/A964M-17 | Standard Specification for Corrugated Steel Box Culverts | |
| 71 | A974-97(2016) | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) | |
| 72 | A975-11(2016) | Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) | |
| 73 | A978/A978M-08(2013) | Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications | |
| 74 | A979/A979M-03(2014)e1 | Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field | |
| 75 | A987/A987M-09(2014) | Standard Practice for Measuring Shape Characteristics of Tin Mill Products | |
| 76 | A998/A998M-12 | Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications | |
| 77 | A1003/A1003M-15 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold- Formed Framing Members | |
| 78 | A1004/A1004M-99(2014) | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members | |
| 79 | A1030/A1030M-16 | Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products | |
| 80 | A1046/A1046M-17a | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process | |
| 81 | A1057/A1057M-08(2014) | Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process | |
| 82 | A1059/A1059M-08(2013) | Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products | |
| 83 | A1063/A1063M-17 | Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process | |
| 84 | A1068-10(2015) | Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products | |
| 85 | A1072/A1072M-11(2015) | Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products | |
| 86 | A1073/A1073M-17 | Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet | |
| 87 | A1074-11(2015) | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals | |
| 88 | A1079-17 | Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | |
| 89 | A1087/A1087M-16 | Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet | |
| 90 | A1093/A1093M-15 | Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials | |
| 91 | F552-14 | Standard Terminology Relating to Chain Link Fencing | |
| 92 | F567-14a | Standard Practice for Installation of Chain-Link Fence | |
| 93 | F626-14 | Standard Specification for Fence Fittings | |
| 94 | F654-07(2017) | Standard Specification for Residential Chain Link Fence Gates | |
| 95 | F668-17 | Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric | |
| 96 | F900-11(2017) | Standard Specification for Industrial and Commercial Steel Swing Gates | |
| 97 | F934-96(2017) | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials | |
| 98 | F964-13 | Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing | |
| 99 | F969-11(2016) | Standard Practice for Construction of Chain-Link Tennis Court Fence | |
| 100 | F1043-17a | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework | |
| 101 | F1083-16 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures | |
| 102 | F1183-96(2017) | Standard Specification for Aluminum Alloy Chain Link Fence Fabric | |
| 103 | F1184-16 | Standard Specification for Industrial and Commercial Horizontal Slide Gates | |
| 104 | F1345-10a(2015) | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric | |
| 105 | F1379-95(2013) | Standard Terminology Relating to Barbed Tape | |
| 106 | F1553-11(2017) | Standard Guide for Specifying Chain Link Fence | |
| 107 | F1664-08(2013) | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer- Coated Steel Tension Wire Used with Chain-Link Fence | |
| 108 | F1665-08(2013) | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer- Coated Steel Barbed Wire Used With Chain-Link Fence | |
| 109 | F1908-08(2013) | Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas | |
| 110 | F1910-98(2013) | Standard Specification for Long Barbed Tape Obstacles | |
| 111 | F1911-05(2015) | Standard Practice for Installation of Barbed Tape | |
| 112 | F1999-14 | Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems | |
| 113 | F2000-10 | Standard Guide for Fences for Baseball and Softball Fields | |
| 114 | F2049-11(2017) | Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas | |
| 115 | F2200-17 | Standard Specification for Automated Vehicular Gate Construction | |
| 116 | F2408-16 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets | |
| 117 | F2409-10(2016) | Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas | |
| 118 | F2453/F2453M-14 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes | |
| 119 | F2548-12 | Standard Specification for Expanded Metal Fence Systems for Security Purposes | |
| 120 | F2589-16 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets | |
| 121 | F2611-15 | Standard Guide for Design and Construction of Chain Link Security Fencing | |
| 122 | F2630-14 | Standard Guide for Self-Closing/Self-Latching General-Purpose Gates | |
| 123 | F2698-08(2013) | Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities | |
| 124 | F2699-08(2013) | Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas | |
| 125 | F2780-09(2014) | Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers | |
| 126 | F2781-15 | Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems | |
| 127 | F2814-09(2015) | Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes | |
| 128 | F2919/F2919M-12 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels | |
| 129 | F2957-13 | Standard Specification for Ornamental Aluminum Fence Systems | |
| 130 | F3000/F3000M-13 | Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats | |
| 131 | F3151-17 | Standard Specification for Driven Steel Post Drive Anchor System | |
| 132 | F3204-16 | Standard Guide for Design and Construction of Welded Wire Fence Systems for Security Purposes | |