ASTM Volume 01.09: Fasteners; Rolling Element Bearings
| Table of Contents | |||
|---|---|---|---|
| Standard Number | Title | ||
| 1 | A31-14 | Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels | |
| 2 | A307-14e1 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength | |
| 3 | A354-17e2 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners | |
| 4 | A394-08(2015) | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare | |
| 5 | A449-14 | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use | |
| 6 | A489-18e1 | Standard Specification for Carbon Steel Eyebolts | |
| 7 | A502-03(2015) | Standard Specification for Rivets, Steel, Structural | |
| 8 | A563M-07(2013) | Standard Specification for Carbon and Alloy Steel Nuts (Metric) | |
| 9 | A563-15 | Standard Specification for Carbon and Alloy Steel Nuts | |
| 10 | A574-17 | Standard Specification for Alloy Steel Socket-Head Cap Screws | |
| 11 | F432-13 | Standard Specification for Roof and Rock Bolts and Accessories | |
| 12 | F436/F436M-18a | Standard Specification for Hardened Steel Washers Inch and Metric Dimensions | |
| 13 | F467-13(2018) | Standard Specification for Nonferrous Nuts for General Use | |
| 14 | F467M-06a(2018) | Standard Specification for Nonferrous Nuts for General Use (Metric) | |
| 15 | F468-16 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use | |
| 16 | F468M-06(2018) | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) | |
| 17 | F541-12 | Standard Specification for Alloy Steel Eyebolts | |
| 18 | F547-17 | Standard Terminology of Nails for Use with Wood and Wood-Base Materials | |
| 19 | F593-17 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs | |
| 20 | F594-09(2015) | Standard Specification for Stainless Steel Nuts | |
| 21 | F606/F606M-16 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets | |
| 22 | F680-17 | Standard Test Methods for Nails | |
| 23 | F788-13(2018) | Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series | |
| 24 | F812-12(2017) | Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series | |
| 25 | F835-18 | Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws | |
| 26 | F836M-16e1 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) | |
| 27 | F837M-16 | Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] | |
| 28 | F837-13(2018) | Standard Specification for Stainless Steel Socket Head Cap Screws | |
| 29 | F844-07a(2013) | Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use | |
| 30 | F879-15 | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws | |
| 31 | F879M-16 | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) | |
| 32 | F880M-16 | Standard Specification for Stainless Steel Socket Set Screws (Metric) | |
| 33 | F880-12(2017) | Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws | |
| 34 | F901-01(2017) | Standard Specification for Aluminum Transmission Tower Bolts and Nuts | |
| 35 | F912-11(2017) | Standard Specification for Alloy Steel Socket Set Screws | |
| 36 | F959/F959M-17a | Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series | |
| 37 | F1136/F1136M-11 | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners | |
| 38 | F1137/F1137M-18 | Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners | |
| 39 | F1428-92(2017) | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners | |
| 40 | F1470-18 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection | |
| 41 | F1554-18 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength | |
| 42 | F1575-17 | Standard Test Method for Determining Bending Yield Moment of Nails | |
| 43 | F1667-18a | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples | |
| 44 | F1789-17a | Standard Terminology for F16 Mechanical Fasteners | |
| 45 | F1940-07a(2014) | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners | |
| 46 | F1941/F1941M-16 | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric | |
| 47 | F2094/F2094M-18a | Standard Specification for Silicon Nitride Bearing Balls | |
| 48 | F2161-10 | Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils | |
| 49 | F2162-01(2016) | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type | |
| 50 | F2163-01(2016) | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring | |
| 51 | F2215-15 | Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications | |
| 52 | F2246-06(2013) | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage | |
| 53 | F2281-04(2017) | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications | |
| 54 | F2282-15 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners | |
| 55 | F2328-17 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts | |
| 56 | F2328M-17 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric) | |
| 57 | F2329/F2329M-15 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners | |
| 58 | F2332-06(2013) | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components | |
| 59 | F2430-04(2018) | Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race) | |
| 60 | F2431-04(2018) | Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring | |
| 61 | F2437/F2437M-17 | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs | |
| 62 | F2443-04(2012) | Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End | |
| 63 | F2444-04(2018) | Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques | |
| 64 | F2482-08(2015) | Standard Specification for Load-Indicating Externally Threaded Fasteners | |
| 65 | F2488-05(2013) | Standard Terminology for Rolling Element Bearings | |
| 66 | F2489-06(2013) | Standard Guide for Instrument and Precision Bearing Lubricants-Part 2 Greases | |
| 67 | F2511-05(2013) | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid | |
| 68 | F2590-06(2013) | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type | |
| 69 | F2591-06(2013) | Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series) | |
| 70 | F2660-13 | Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement | |
| 71 | F2661-07(2015) | Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer | |
| 72 | F2688-08(2014)e1 | Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers | |
| 73 | F2730/F2730M-18a | Standard Specification for Silicon Nitride Cylindrical Bearing Rollers | |
| 74 | F2832-11(2016) | Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners | |
| 75 | F2833-11(2017) | Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type | |
| 76 | F2882/F2882M-17 | Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric) | |
| 77 | F2953-12 | Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages | |
| 78 | F3019/F3019M-14 | Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners | |
| 79 | F3042-13(2018) | Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws | |
| 80 | F3043-15 | Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength | |
| 81 | F3111-16 | Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength | |
| 82 | F3125/F3125M-15a | Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions | |